Structural and industrial steel fabrication for builders, head contractors and industrial operators. Fabricated to AS/NZS 5131 and welded to AS/NZS 1554 in our Western Sydney workshop.
Five lines of work, fabricated for commercial builds and operating industrial sites. If it is steel and it is on your drawings, start a docket and we will price it.
Beams, columns, portal frames, trusses, rafters, base plates and connections for commercial, multi-residential and industrial builds.
Steel stairs, landings, mezzanine platforms, walkways, ladders and handrails, fabricated as complete assemblies.
Chutes, hoppers, bins, skids, machine frames, guarding and conveyor support steel for operating sites.
Cut and fabricated plate work: gussets, brackets, tanks, bins, ducting and heavy plate assemblies.
Lintels, embeds, cleats, brackets, bollards and frames. The small items every job needs, delivered with the main package.
Every job runs through the same seven stations. Two of them are hold points: nothing moves on until they are signed off.
Send the drawings and scope. We price the package and confirm materials, finish and dates.
HHold pointSteel ordered to the grades and sizes shown on the drawings.
Sections and plate cut, drilled, notched and prepared to dimension.
Assemblies fitted up and welded to AS/NZS 1554.
Dimensions, fit-up and welds checked against the drawings.
HHold pointSteel finished as your specification calls for.
Every piece marked to the drawings, loaded and sent out the gate.
Your engineer specifies the standard. We fabricate and weld to it, so the steel that arrives on site is the steel on the drawings.
The Australian and New Zealand standard for fabricating structural steel. It sets the requirements for materials, preparation, dimensional tolerances and inspection.
The standard for welding structural steel. It covers welding procedures, welder qualification and the quality every weld has to meet.
Structural and secondary steel packages for commercial, multi-residential and industrial builds, priced from your drawings and delivered to suit the program.
Plant steelwork, platforms, guarding and equipment frames for operating sites, fabricated to your engineering drawings.
The workshop sits in Sydney's west, close to the M7 and M4. Steel goes out the gate tagged and loaded for sites across the country.
Distances are approximate road kilometres from the workshop.
Send the drawings through or call the workshop. Tell us the scope, quantities, finish and where it is going, and we will come back with a price.
Structural, industrial and plate steelwork, fabricated in Glendenning to AS/NZS 5131 and welded to AS/NZS 1554, then dispatched to sites across Australia.
The primary and secondary steel that holds a building up. We fabricate structural packages for commercial, multi-residential and industrial projects, working from the engineer's design and fabricating to AS/NZS 5131.
Every member is cut, prepared, fitted and welded in the workshop, checked against the drawings and marked so the crew on site knows exactly where it goes.
Steel stairs, landings and platforms fabricated as complete assemblies, ready to lift into place. We build access steel for commercial buildings, warehouses and industrial plant.
Stringers, treads, handrails and landings are fabricated together and checked as a set, so the stair that arrives is the stair that was drawn.
Fabricated steel for factories, processing plants and operating sites. We work to your engineering drawings to build the frames, chutes and supports that keep production running.
Plant steel is fabricated and welded in the workshop to AS/NZS 1554, then freighted to the site, whether that is down the road or across the country.
Boilermaking is heavy plate work: cut, fitted and welded into assemblies that have to be right the first time.
From single brackets to large fabricated plate assemblies, the work is set out from the drawings and welded to AS/NZS 1554.
Every project has a list of small steel items that can hold up the program if they arrive late. We fabricate them alongside the main package so everything lands on site together.
The three questions every package comes down to, answered before the first cut.
Structural steel fabricated to AS/NZS 5131 and welded to AS/NZS 1554, to the requirements on your drawings and specification.
Tell us the finish your specification calls for and we will price the package to suit.
From the Glendenning workshop to sites across Sydney, regional NSW and interstate. Steel is tagged, loaded and dispatched to suit your program.
The more we know up front, the faster and tighter the price. Not everything is needed to start a conversation.
Zehra Naz Pty Ltd is a steel fabrication and boilermaking business in Glendenning, in Sydney's west. We have been fabricating steel for builders, head contractors and industrial clients since March 2010.
We are a fabrication shop first. Work comes in as drawings and goes out as checked, tagged steel ready for site.
In between, it is cut, fitted, welded and inspected in our own workshop, fabricated to AS/NZS 5131 and welded to AS/NZS 1554. That is the work our clients rely on, and it is the work we have been doing for more than fifteen years.
Our clients are trade buyers: estimators pricing a package, project managers holding a program together, and engineers keeping a plant running. They need a fabricator who reads the drawings properly, says what the steel will cost, and delivers it when agreed.
Being in Glendenning puts the workshop close to the M7 and M4, so steel heads north, south and west without crossing the city. From there it goes to sites across Australia.
Simple to say, harder to do on every job.
What is drawn is what is fabricated. Questions get asked before the steel is cut, not after it arrives on site.
Fabricated to AS/NZS 5131 and welded to AS/NZS 1554, with every assembly checked before it leaves the workshop.
Steel that arrives late costs the whole program. We quote dates we can meet and keep our clients informed.
Everything your accounts or procurement team needs to set us up as a supplier.
Tell us about the job and we will get back to you to talk through drawings and pricing. For anything urgent, call the workshop.